Contact |
Close filters
  •  
from to
 
1 From 5
No results were found for the filter!
Spray on glue, 500ml
Spray on glue, 500ml

50011

Spray on glue,
Content 0.559 l (€24.15 * / 1 l)
€13.50 *
Immediately available
available in stock
Rubber and vinyl spray adhesive 80 - 500 ml
Rubber and vinyl spray adhesive 80 - 500 ml

50013

Optimal for caravan insulation - super spray adhesive heat resistant up to 80°
Content 0.505 l (€54.46 * / 1 l)
€27.50 *
Immediately available
available in stock
Dispersion adhesive without solvent
Dispersion adhesive without solvent

50048

Synthetic resin dispersion adhesive 8/A 1728 - Heat resistant up to 100 °C
Content 10.595 kg (€32.00 * / 1 kg)
€339.00 *
Immediately available
available in stock
Panel Galoway II - leather grain beige
Panel Galoway II - leather grain beige

510071

A perfect finish for your campervan
Content 3.077 m² (€24.36 * / 1 m²)
€74.95 *
Immediately available
available in stock
Cladding panel Flexaform Struktura - pearl gray
Cladding panel Flexaform Struktura - pearl gray

51010

A good finish for your vehicle insulation
Content 2.882 m² (€12.91 * / 1 m²)
€37.20 *
Immediately available
available in stock
Intervelours Graphite 191cm
Intervelours Graphite 191cm

51020

Nestles lightly to the vehicle body
Content 92.399 m² (€14.83 * / 1 m²)
€1,370.00 *
Immediately available
available in stock
Sliding door panel Ducato, light gray 1260x1053x99,9mm, BJ 2006
Sliding door panel Ducato, light gray 1260x1053x99,9mm, BJ 2006

510470

Schiebetürverkleidung Ducato, hellgrau 1260x1053x99,9mm, BJ 2006
€177.00 *
Immediately available
available in stock
Kunstleder Santiago cog6m
Kunstleder Santiago cog6m

510430

Kunstleder Santiago cognac 1,4m breit, FR, 6m
Content 8.517 m² (€17.49 * / 1 m²)
€149.00 *
Immediately available
available in stock
Velours m.Flies 3mm grau
Velours m.Flies 3mm grau

510160

Velours mit Flies 3mm grau 155cm breit 10m
Content 10.093 lfm (€32.10 * / 1 lfm)
€324.00 *
Immediately available
available in stock
Interior trim faux leather grained / laminated - Light gray - linear meter
Interior trim faux leather grained / laminated - Light gray - linear meter

510211

Gives the vehicle interior an elegant classic look
Content 1.414 m² (€31.79 * / 1 m²)
€44.95 *
Immediately available
available in stock
Kunstleder Madryt schw.6m
Kunstleder Madryt schw.6m

510260

Kunstleder Madryt schwarz 1,4m breit, FR, 6m
Content 8.475 m² (€14.04 * / 1 m²)
€119.00 *
Immediately available
available in stock
Kunstleder Santiago co10m
Kunstleder Santiago co10m

510431

Kunstleder Santiago cognac 1,4m breit, FR, 10m
Content 14.123 m² (€16.50 * / 1 m²)
€233.00 *
10 immediately available
10 immediately available
1 From 5

Cladding the motorhome from the inside.
There are several ways of approaching this. Once the original interior trim is in place, it can be easily reused. Because as long as it matches the colour and space technically with the furniture, sometimes only a small preparation is sufficient. To hide the X-trem or other insulating material, however, you can rarely get around the 3mm poplar plywood coated or the Intervelour.

Here are a few simple tips:
Do not throw away old cladding, if still in place! The old parts can still serve well as a pattern! If they are no longer available, you will have to start with pencil and tape measure and please do not forget the fixing points!
For small pieces you can also use newspaper or cardboard as a blueprint.
Before cutting: Measure out exactly and use the blueprints made if necessary. This way you can save a lot of material by a good arrangement.
You can now saw out the 3mm poplar wood or the hardboard with a jigsaw. The edges are smoothed with a file. As a clean connection between the boards we recommend the 3mm connection profile . The parts are screwed to the desired fixing points with countersunk or tapered screws.
In case of direct screwing to the vehicle panel, it is recommended to underlay the contact points with a noise-insulating material (x-Trem/Felt or similar).
It is easier with Isovelour, Intervelour or imitation leather. Cut out and glue on, done!
Of course it is not quite that simple. These fabrics are relatively thin, which means that an irregularity or a little too much glue will quickly be pressed through. Therefore it is better to use a little less glue than too much. We offer many velour fabrics laminated with foam to counteract the irregularities. If you don't find the right one, we also have a laminated foam as a base for your individual cladding material in our programme.

Viewed