21075
21076
21082
21085
292998
210931
21093R
in approx. 1 - 2 months available
in approx. 1 - 2 months available
210941
21094R
210960
21097
21098
The VW T6 pop top roof superflat Classic is, as the name suggests, the classic form of the VW T6 sleeping roof. The roof is installed with a separately ordered reinforcing frame. The VW T6 pop top roof EASY Fit is the further development of the VW T6 pop top roof Classic. Here, a reinforcing frame integrated into the roof is used. This ensures a simpler assembly. The VW T6 pop top roof EASY Fit V-Tec is a sandwich construction of two shells. This newly developed sleeping roof shell convinces with an elegant smooth surface inside and outside.
VW T6 elevating roof, VW T6 folding roof super flat Classic
The VW T6 pop top roof can be ordered as a front or rear-mounted version. The scissors lift the VW T6 pop top roof by approx. 35 cm when opening. This has the advantage that there is plenty of legroom in the footwell when sleeping. The tent bellows made of breathable and water-repellent fabric has three windows that can be darkened. The front is equipped with a window made of foil, which allows light in but also protects against bad weather. The two side windows are equipped with mosquito netting and can be opened completely by zip.
A reinforcing frame stiffens the roof cut-out. This is mounted before the sleeping roof is installed. Scissors, shock absorbers and tent bellows are then attached to the frame.
For this classic VW T6 sleeping roof we offer the sleeping roof bed Standard. The sleeping-roof bed consists of a solid board (almost always light poplar plywood) and a 3 to 5 cm thick, covered foam lying surface. Gas springs support and facilitate handling when raising and lowering the bed.
VW T6 pop top roof Easy Fit / VW T5 pop top roof Easy Fit
Just like the VW T5 pop top roof Easy Fit, the VW T6 sleeping roof Easy Fit has an extremely flat design and is very aerodynamic with a height of 7cm. The separate front spoiler reduces wind noise even when driving faster. The roof shell is a very stable sandwich construction and is already insulated during production with an integrated textile inner lining with foam lamination. This inner lining is additionally sound-absorbing and moisture-compensating. When installing the VW T5 pop top roof Easy Fit, no further reinforcing frame is necessary.
The tent bellows and scissors are already mounted on the integral reinforcement frame. The tent bellows made of breathable and water-repellent fabric has three windows that can be darkened. The front has a window made of foil. Integrated into this is a small forced ventilation system consisting of a mosquito net. The two side windows are equipped with a mosquito net and can be opened completely with a zip.
When opening, the VW T6 sleeping roof Easy Fit as well as the VW T5 pop top roof Easy Fit is raised by approx. 35 cm, thus creating a spacious and comfortable sleeping area.
Like the VW T5 pop top campervan roof Easy Fit, the VW T6 sleeping roof Easy Fit is offered with two different roof locks. Once with a conventional roof lock with two straps, or with the Quick Lock locking system. We offer the VW T6 sleeping roof Easy Fit, or the VW T5 pop top roof Easy Fit for the short and long wheelbase.
VW T6 sleeping roof Easy Fit V-Tec
The new Easy Fit V-Tec sleeping roof for a VW T6 campervan is an innovative, very stable sandwich construction of inner and outer shell. The roof is light and stable and comes with an integrated reinforcement frame. The elegant, smooth surface inside and outside has a good rain roll-off effect and allows easy cleaning. The scope of delivery and the construction method are similar to the VW T6 campervan sleeping roof Easy Fit.
VW T6 sleeping roof Easy Fit Tent Bellows Open-Sky for the VW T6 & VW T5 Bus short wheelbase
Enjoy the convertible feeling in the VW T5 and VW T6 campervan sleeping roof with the Open Sky tent bellows. This special tent bellows must be ordered as an option to the desired Easy Fit roof. In the front area it can be opened easily and almost completely with the sewn-in zip. The open tent bellows is then attached to the roof with loops.
Campervan roof bed Standard, roof bed Comfort bed
For the VW T6 sleeping roof Easy Fit we have two bed variants in our programme. The sleeping roof bed Standard is the more comfortable and less expensive version. The bed consists of a solid wooden plate and a 3 to 5 cm thick foam lying surface with cover. Gas springs support and facilitate handling when raising and lowering the bed.
With its integrated spring system, the Comfort Roof Bed provides optimum sleeping comfort. Spring elements can be adjusted to the needs of the individual, whether soft to medium or hard. The 5 cm thick foam with cover forms a comfortable sleeping surface and adapts to the body shape. A screen covers the access opening during the ride. Gas springs support the bed when it is folded up and down.
VW T6 campervan elevating roof
The vertical VW T6 elevating roof is easy to set up thanks to the support of gas pressure springs. The VW T6 vertical elevating roof offers a comfortable standing height on an area of approx. 106 X 101 cm. The tent bellows has three windows that can be darkened, of which the two side windows are each also equipped with a mosquito net.
VW T6 pop top roof comfort, is an electrically pop top sleeping roof
The new VW T6 pop top roof comfort for the VW T6 with short wheelbase is the cornerstone of a new generation of sleeping roofs with even more operating and sleeping comfort.
This sleeping roof in Easy Fit V-Tec design offers with approx. 35 cm in the foot area especially much comfort. This makes the sleeping area on the first floor more airy and easier to use.
The electric pop top mechanism of the VW T6 van pop top roof works reliably and takes over the complete pop-up and closing process. The process takes no longer than one minute. The drive is protected from the weather and is easily accessible for service work.