• Komfortabel und einfach zu bedienen
• Für die Ladegeräte der Baureihe VBCS Triple
• Grafik Display mit großer Anzeige
• Ladestrom-Anzeige der aktiven Ladequelle
• Spannungsanzeige Bord- und Starterbatterie

• Einfache Ansteuerung über einfachen EIN / AUS-Schalter
• Hohe Schaltströme, kurzzeitig hoch überlastbar
• Von außen sichtbare Schaltzustands-Anzeige
• Automatische Abschaltung bei Unterspannung 8,5 V

• Alle Informationen und Funktionen in einem Gerät
• Einfache, intuitive Bedienung
• Informationen als Zahlenwert und als Balkengrafik
• Großes, weiß beleuchtetes Grafikdisplay
• Kompakt, einfache Montage
• Geringe Einbautiefe, niedriger Stromverbrauch
• Für 12 V-Bordbatterien

• Für 12- sowie 24-V-Systeme geeignet
• Geringe Einbautiefe
• Einfache Montage

• Die Füllhöhen des Tanks wird als übersichtliche Leuchtbalken mit jeweils 10 Leuchtdioden dreifarbig dargestellt
• Die Anzeigen arbeiten stufenlos
• Auf Knopfdruck ist die Anzeige ein- und abschaltbar
• Schaltet sich nach ca. 10 Minuten automatisch wieder ab
• Geringe Frontplattenmaße und die besonders geringe Einbautiefe von nur 18 mm erlauben die Montage an nahezu jeder Stelle
• Gegen Falschpolung und Überlastung geschützt

The device is constantly in contact with "its battery" and thus registers and evaluates all battery actions. All charging and discharging currents are meticulously counted, battery size, self-discharge, battery load, etc. are taken into account using programmed characteristic curve fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the state of charge (the capacity that can still be removed, residual charge) of the on-board battery as a numerical value in ampere-hours ("Ah") and as a percentage ("%") as well as a clear level bar, like a fuel gauge. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.

Of course, the current battery voltage ("V") and the current battery current ("A") are also available in the display. Discharge currents (consumers) are indicated by a minus sign. Charging currents are also indicated by a clearly legible "Charge" sign. Independently of this, there is a further display option for the voltage of a second battery, e.g. for monitoring the starter battery of the vehicle.

The LCD battery computer S has a freely programmable switching output for control, monitoring and warning purposes, e.g. to automatically switch consumers or issue a warning depending on the charge state of the on-board battery (0-100%). On and off switching points are freely and independently adjustable in %, enabling any switching functions. In addition, these can be manually overridden at any time by pressing a button.

Application example: automatic protection of the battery against harmful deep discharge, the consumers are switched off exactly according to the state of charge, e.g. at less than 25% state of charge. At the push of a button, an EMERGENCY ON function is possible for the continued supply of the consumers. The device can thus also be used as a remote battery main switch (on/off) with deep discharge protection.

A plug-in connection cable connects the display completely with a robust precision measuring resistor (smart shunt), which is connected directly to the negative terminal of the on-board battery and at which the voltages and currents of the battery are recorded. Here is also the switching output for the connection of signal generators or powerful switching relays.

Fitting the VOTRONIC module system, the device lines up both visually and mechanically (uniform height 85 mm) to the other display modules and the small installation depth of only 22 mm allows mounting in almost any location.

• Mindest-Batterie-Kapazität 50 Ah
• Batteriespannung Bordbatterie 7 bis 32 V (Volt). interne Messauflösung 0,1 V
• Batteriestrom (laden/entladen) +/- 0 bis max. +/- 1800 A, interne Messauflösung 0,1 A
• Batteriespannung 2. Batterie (z.B. Startbatterie), 7 bis 32 V (Volt), interne Messauflösung 0,1 V
• Schaltausgang frei programmier- und tastbar (PNP, Plus-Potential 12V / 24V, max. 0,5A)

• Genaue Anzeige
• 3-farbige Füllstandsanzeige

Instantly shows you the current solar power from 0 - 999 W (solar current 0 - 32 A), loaded solar capacity from 0 - 9999 kWh, loaded solar energy from 0 - 9999 kWh.

Further specifications:

• Current consumption: 3 mA
• Lighting max: 30 mA

• Kombianzeige für Batterie- und Solarleistung
• Großes Display
• Anschluss an Regler SR und MPP

The device is constantly in contact with "his battery" and thus registers and evaluates all battery actions. All charging and discharging currents are meticulously counted, battery size, self-discharge, battery load, etc. are taken into account using programmed characteristic curve fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the state of charge (the capacity that can still be removed, residual charge) of the on-board battery as a numerical value in ampere-hours ("Ah") and as a percentage ("%"), as well as a clear level bar, like a fuel gauge. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.

Of course, the current battery voltage ("V") and the current battery current ("A") are also available in the display. Discharge currents (consumers) are indicated by a minus sign. Charging currents are also indicated by a clearly legible "Charge" sign. Independently of this, there is a further display option for the voltage of a second battery, e.g. for monitoring the starter battery of the vehicle.

The LCD battery computer S has a freely programmable switching output for control, monitoring and warning purposes, e.g. to automatically switch consumers or issue a warning depending on the charge state of the on-board battery (0-100%). On and off switching points are freely and independently adjustable in %, enabling any switching functions. In addition, these can be manually overridden at any time by pressing a button.

Application example: automatic protection of the battery against harmful deep discharge, the consumers are switched off exactly according to the state of charge, e.g. at less than 25% state of charge. At the push of a button, an EMERGENCY ON function is possible for further supply of the consumers. The device can thus also be used as a remote battery main switch (on/off) with deep discharge protection.

A plug-in connection cable connects the display completely to a robust precision measuring resistor (smart shunt), which is connected directly to the negative terminal of the on-board battery and at which the voltages and currents of the battery are recorded. Here is also the switching output for connecting signal generators or powerful switching relays.

Microprocessor-controlled, the following values are measured, calculated and displayed:

• Minimum battery capacity 50 Ah
• Battery voltage on-board battery 7 to 32 V (volts). Internal measurement resolution 0.1 V
• Allows conclusions to be drawn about the battery behavior under different loads and is used for functional control, e.g. the charger, solar system, alternator, etc. flashing warning indicator in the event of overvoltage.
• Battery current (charge / discharge) +/- 0 to max +/- 1800 A, internal measurement resolution 0.1 A
• Control of discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign.
• Battery capacity (Ah and %)
• Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full)
• Remaining time (h)
• Battery voltage 2nd battery (eg start battery), 7 to 32 V (volts), internal measurement resolution 0.1 V
• Switching output freely programmable and scannable (PNP, plus potential 12V / 24V, max. 0.5A)

• Spannung Start- und Bordbatterie (7-32 V)
• Batteriestrom (laden/entladen in A)
• Batterie-Restkapazität (in % und Ah)
• Restlaufzeit (in h)
• Auch als Hauptschalter und Tiefentladeschutz nutzbar

• Programmierbare Schaltpunkte
• Als Batteriewächter nutzbar
• Für Kapazitäten bis 2700 Ah
• Messbereich 7 - 32 V

• Aktive Ladequelle (Netz,Ladewandler, Solar)
• Kontrolle Netz-Ladefunktion (AC Power Limit)
• Batterie-Ladephase
• Batteriespannung Bord-/ Startbatterie
• Aktueller Ladestrom
• Solar-Computer-Funktion

• Informationen als Zahlenwerte und Balkengraphik
• Einfache, intuitive Bedienung
• Großes, weiß beleuchtetes Graphikdisplay
• Kompakte Bauform
• Einfache Montage

• Informationen als Zahlenwerte und Balkengraphik
• Einfach, intuitive Bedienung
• Großes, weiß beleuchtetes Graphikdisplay
• Kompakte Bauform
• Einfache Montage