Search results VOTRONIC
No results were found for the filter!
Tank electrode - Votronic 12-24 K
Tank electrode - Votronic 12-24 K
Tank electrode Votronic 12-24 K, incl. seal, union nut PG 29 and operating instructions.
- inkl. Dichtungsring & Überwurfmutter
For orders, please switch to the German webshop (delivery to Germany only). You would like to order to Great Britain? Then click here.
Votronic tank electrode for fecal tank
Votronic tank electrode for fecal tank
Fecal tank electrode 20 K-WC - tan k electrode for WC-cartridge tanks with dirt insesitive measuring method incl. mounting ring for mouting opening Ø38mm. Waterproof and very robust (IP67).
- Wasserdicht
- Besonders robust
- Mit Montagering für Montageöffnung von Ø38mm.
For orders, please switch to the German webshop (delivery to Germany only). You would like to order to Great Britain? Then click here.
Fueling electrode 15-50K for fresh, waste water and septic tanks
Fueling electrode 15-50K for fresh, waste water and septic tanks
For tank heights up to 50 cm. Electrode can be shorten down to min. 15cm. Insensitive against soiling and sedimentations in the water. Capactive measurement method. For plastic and metal tanks. Mounting -Ø 38 mm. Screwing with a practical double thread. For the connection between electrode and display only a 3-wire cable is necessary.IP 67.
- Für Frisch- und Abwassertanks
- Für Tankhöhen von 150 - 500 mm
- Unempfindlich gegen Verschmutzungen und Ablagerungen
- Für Kunststoff und Metalltanks
- Einfache Anpassung auf die vorgegebene Tankhöhe
- Lineares, stufenloses Signal der Füllhöhe
- Für 12V- und 24V-Dauerbetrieb geeignet
For orders, please switch to the German webshop (delivery to Germany only). You would like to order to Great Britain? Then click here.
not in stock, can be ordered
in 5 day(s)
in 5 day(s)
Currently not in stock, can be ordered
in 5 day(s)
in 5 day(s)
€70.60
*
Tank sensor K-FL - For tank heights from 30 to 110 cm
Tank sensor K-FL - For tank heights from 30 to 110 cm
Tank sensor K-FL for fresh and waste water tanks - flexible cable probe for tank heights from 30 to 110 cm. Approved in accordance with drinking water regulation DIN 2001-2. Works according to the capacitive measuring method and is suitable for plastic and metal tanks.
Further specifications:
- Voltage: 12 / 24 V
- Current consumption: 7 mA
- Mounting hole: 38 mm (PG 29 thread)
- Mounting: Top side
- Suitable for: Fresh water and waste water tank
Note: Not suitable for waste water tank.
- Tankonde flexibel für Tankhöhen von 30 - 110 cm
- Für Kunststoff- und Metalltanks geeignet
- Zugelassen nach Trinkwasserverordnung DIN 2001-2
For orders, please switch to the German webshop (delivery to Germany only). You would like to order to Great Britain? Then click here.
Immediately available
available in stock
€78.60
*