• Temperature sensor for Carbest chargers

• Robust main switch with 20A overcurrent switch (automatic circuit breaker)
• Thermal triggering, high overload capacity for short periods of time
• Tripping at more than 20 A continuous current with backlash of the rocker switch
• suitable for 12 V and 24 V

• black printed, transparent, suitable for light/silver surfaces
• pre-punched, abrasion-resistant, dimensions of pictograms approx. 12x10 mm

• Automatic battery regeneration
• Connection remote operation / display
• Power limit function Mains / charging power reduction
• Temperature compensation
• Voltage sensor (for very long charging lines)
• Power supply function (battery replacement)
• Battery capacity (size) adjustable
• Silent Run function (night setback)
• Temperature sensor included

• Constant, fully automatic battery charging
• High operational reliability
• Fast and battery friendly charging
• Robust technology and compact design
• Easy installation and short cable runs
• Auxiliary charging branch for support charging and charge maintenance of the vehicle starter battery during long idle periods
• The supplied 12 V consumers are protected against overvoltage and voltage fluctuations
• The powerful charge converter (booster) enables the complete charging of the on-board battery while driving
• Battery training protects the unused (lead-acid) battery from rapid aging and failure due to sulfation during wintering, seasonal operation or extended idle periods
• The charging voltage is free from peaks and regulated in such a way that overcharging of the batteries is excluded

• Circuit breakers 6 A, 8 A, 10 A pre-wired to the group
• 1 circuit breaker 12 A, individually wirable
• suitable for 12 V and 24 V
• Connection via flat plug
• Optical trigger control

Further specifications:

• Voltage: 12 V
• Current consumption LED OFF: 0 mA
• Current consumption LED ON: 10 mA

• 4 switches ON/OFF, each 8 A loadable,with control LED
• Connection via screw terminals
• Version 12 V

• Single switch 2xUM with flat plug connection
• Load capacity: max. 2x8 A resp. 1x16 A
• suitable for 12 V and 24 V

• 2 single switches 2xUM with flat plug connection
• Load capacity: max. 2x8 A or 1x16 A each
• for 12V and 24V suitable

• For 12 V consumers with DIN plug (ISO 4165), load capacity 8 A
• Connection via flat plug

• Starter battery is always charged
• Always 2 full batteries, which last longer

• High charging power even for short distances or full charge for longer trips
• Increases/decreases the voltage to the necessary level to precisely charge the on-board battery with the optimal charging characteristic for it.
• Fully compensates for line losses and voltage fluctuations in the alternator, such as those that constantly occur to a considerable extent in Euro 6 vehicles (intelligent alternators)
• Compact design, low weight (high-frequency switch mode technology) and powerfully dimensioned power components for safe operation
• Significantly improved energy balance of the on-board battery without intervention in the starter circuit
• Supplied 12 V consumers are protected against overvoltage and voltage fluctuations
• The charging voltage is free from peaks and regulated in such a way that overcharging of the batteries is excluded
• Fully automatic operation: the device is constantly connected to the batteries and is automatically activated by the running alternator of the vehicle. When the engine is not running, the batteries are not discharged
• Parallel and buffer operation: In case of simultaneous consumption, the battery is further charged or kept full. The device automatically calculates and monitors the adjustment of the charging times
• Monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short-circuit, malfunction and battery back-discharge by electronic cut-off up to complete disconnection of device and battery.