• Comfortable and easy to use
• For the chargers of the VBCS Triple series
• Graphic display with large display
• Charging current display of the active charging source
• Voltage indicator for on-board and starter battery

• Simple control via simple ON / OFF switch
• High switching currents, briefly highly overloadable
• Externally visible switching status display
• Automatic switch-off at undervoltage 8.5 V

• Information as numerical values and bar graphs
• Simple, intuitive operation
• Large, white illuminated graphic display
• Compact design
• Simple assembly

• The filling levels of the tank are displayed as clearly arranged light bars with 10 LEDs each in three colors
• The displays operate steplessly
• The display can be switched on and off at the touch of a button
• Automatically switches off again after approx. 10 minutes
• Small front panel dimensions and the particularly low installation depth of only 18 mm allow mounting in almost any location
• Protected against wrong polarity and overload

The device is constantly in contact with "its battery" and thus registers and evaluates all battery actions. All charging and discharging currents are meticulously counted, battery size, self-discharge, battery load, etc. are taken into account using programmed characteristic curve fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the state of charge (the capacity that can still be removed, residual charge) of the on-board battery as a numerical value in ampere-hours ("Ah") and as a percentage ("%") as well as a clear level bar, like a fuel gauge. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.

Of course, the current battery voltage ("V") and the current battery current ("A") are also available in the display. Discharge currents (consumers) are indicated by a minus sign. Charging currents are also indicated by a clearly legible "Charge" sign. Independently of this, there is a further display option for the voltage of a second battery, e.g. for monitoring the starter battery of the vehicle.

The LCD battery computer S has a freely programmable switching output for control, monitoring and warning purposes, e.g. to automatically switch consumers or issue a warning depending on the charge state of the on-board battery (0-100%). On and off switching points are freely and independently adjustable in %, enabling any switching functions. In addition, these can be manually overridden at any time by pressing a button.

Application example: automatic protection of the battery against harmful deep discharge, the consumers are switched off exactly according to the state of charge, e.g. at less than 25% state of charge. At the push of a button, an EMERGENCY ON function is possible for the continued supply of the consumers. The device can thus also be used as a remote battery main switch (on/off) with deep discharge protection.

A plug-in connection cable connects the display completely with a robust precision measuring resistor (smart shunt), which is connected directly to the negative terminal of the on-board battery and at which the voltages and currents of the battery are recorded. Here is also the switching output for the connection of signal generators or powerful switching relays.

Fitting the VOTRONIC module system, the device lines up both visually and mechanically (uniform height 85 mm) to the other display modules and the small installation depth of only 22 mm allows mounting in almost any location.

• Minimum battery capacity 50 Ah
• Battery voltage on-board battery 7 to 32 V (volts). internal measuring resolution 0.1 V
• Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measuring resolution 0.1 A
• Battery voltage 2nd battery (e.g. starting battery), 7 to 32 V (volts), internal measuring resolution 0.1 V
• Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A)

Instantly shows you the current solar power from 0 - 999 W (solar current 0 - 32 A), loaded solar capacity from 0 - 9999 kWh, loaded solar energy from 0 - 9999 kWh.

Further specifications:

• Current consumption: 3 mA
• Lighting max: 30 mA

• Combination display for battery and solar power
• Large display
• Connection to SR and MPP controllers

The device is constantly in contact with "his battery" and thus registers and evaluates all battery actions. All charging and discharging currents are meticulously counted, battery size, self-discharge, battery load, etc. are taken into account using programmed characteristic curve fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the state of charge (the capacity that can still be removed, residual charge) of the on-board battery as a numerical value in ampere-hours ("Ah") and as a percentage ("%"), as well as a clear level bar, like a fuel gauge. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.

Of course, the current battery voltage ("V") and the current battery current ("A") are also available in the display. Discharge currents (consumers) are indicated by a minus sign. Charging currents are also indicated by a clearly legible "Charge" sign. Independently of this, there is a further display option for the voltage of a second battery, e.g. for monitoring the starter battery of the vehicle.

The LCD battery computer S has a freely programmable switching output for control, monitoring and warning purposes, e.g. to automatically switch consumers or issue a warning depending on the charge state of the on-board battery (0-100%). On and off switching points are freely and independently adjustable in %, enabling any switching functions. In addition, these can be manually overridden at any time by pressing a button.

Application example: automatic protection of the battery against harmful deep discharge, the consumers are switched off exactly according to the state of charge, e.g. at less than 25% state of charge. At the push of a button, an EMERGENCY ON function is possible for further supply of the consumers. The device can thus also be used as a remote battery main switch (on/off) with deep discharge protection.

A plug-in connection cable connects the display completely to a robust precision measuring resistor (smart shunt), which is connected directly to the negative terminal of the on-board battery and at which the voltages and currents of the battery are recorded. Here is also the switching output for connecting signal generators or powerful switching relays.

Microprocessor-controlled, the following values are measured, calculated and displayed:

• Minimum battery capacity 50 Ah
• Battery voltage on-board battery 7 to 32 V (volts). Internal measurement resolution 0.1 V
• Allows conclusions to be drawn about the battery behavior under different loads and is used for functional control, e.g. the charger, solar system, alternator, etc. flashing warning indicator in the event of overvoltage.
• Battery current (charge / discharge) +/- 0 to max +/- 1800 A, internal measurement resolution 0.1 A
• Control of discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign.
• Battery capacity (Ah and %)
• Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full)
• Remaining time (h)
• Battery voltage 2nd battery (eg start battery), 7 to 32 V (volts), internal measurement resolution 0.1 V
• Switching output freely programmable and scannable (PNP, plus potential 12V / 24V, max. 0.5A)

• Voltage starting and on-board battery (7-32 V)
• Battery current (charge/discharge in A)
• Battery remaining capacity (in % and Ah)
• Residual term (in h)
• Can also be used as a main switch and deep discharge protection

• Programmable switching points
• Can be used as battery monitor
• For capacities up to 2700 Ah
• Measuring range 7 - 32 V

• Active charging source (mains, charging converter, solar)
• Check mains charging function (AC Power Limit)
• Battery charging phase
• Battery voltage on-board / starter battery
• Current charging current
• Solar computer function

• Information as numerical values and bar graphs
• Simple, intuitive operation
• Large white backlit graphic display
• Compact design
• Simple assembly

• Information as numerical values and bar graphs
• Simple, intuitive operation
• Large, white illuminated graphic display
• Compact design
• Simple assembly