Suchergebnisse carbest
Für die Filterung wurden keine Ergebnisse gefunden!
Remote Control for Carbest Inverter
81949
Remote Control with cable (4,5m) for the folling Carbest Inverter (item-no.'s:)822802, 822803, 82281, 822812, 822811
Carbest remote control for inverters with 5m cable
81948
Carbest remote control for inverters with 5m cable. The inverter is often installed e.g. under a seat. Then this practical remote control is almost indispensable for switching the inverter on and off or for displaying the functionality. With the 5m long cable, the remote control is always at hand, even for longer vehicles.
Carbest Remote Control for Carbest Inverter (from 2019)
81947
Cable remote control with 5m cable for inverters 82282 - 82286.
Carbest Sine Wave Inverter 300W (12V/230V)
82281
Pure Sine Wave Inverter simulate the mains voltage the best. The output voltage is often "cleaner" than in the 230 V mains. No restriction in operation, even for high-quality devices, laptops, oscillographs, measuring computer or microwaves.
Automatic load detection: The inverter switches to a power saving mode when no current is taken for one minute.
Ventilation: If the temperature is too high, the built-in fan switches on automatically for cooling.
Aluminium case: The stable...
Sinus Power Inverter
82282
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter
82283
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
629.00€
not in stock, can be ordered
in approx. 4 - 5 months available
in approx. 4 - 5 months available
Currently not in stock, can be ordered
Sinus Power Inverter
82285
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter
82286
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter with mains priority circuit - 1000 to 2000 watts
82279
Integrated 230 volt mains priority circuit: As soon as 230 volt shore power (e.g. from the campsite) is available, the inverter operation is automatically interrupted. The inverter operation again immediately resumed as soon as no more outside power is available. Integrated 3-stage battery charger for gel and AGM batteries with 10 A or 15 A (model-dependent). Spare / extension cable: ± 25 mm², 2 x 200 cm Art. no. 81940 (With 2 ring eyelets pre-assembled) ± 50 mm², 2 x 200 cm...
619.00€
not in stock, can be ordered
in approx. 6 - 7 months available
in approx. 6 - 7 months available
Currently not in stock, can be ordered
34.90€
not in stock, can be ordered
in approx. 2 - 3 months available
in approx. 2 - 3 months available
Currently not in stock, can be ordered
Extra connection cable +/- 25mm2 in 2m length
81940
Prefabricated with 2 eyelets Prefabricated with 2 eyelets ± 25 mm2, 2 x 200 cm
Extra connection cable +/- 50mm2 in 2m length
81941
Prefabricated with 2 eyelets. ± 25 mm2, 2 x 200 cm
Sinus Power Inverter
82284
Automatic load detection - The inverter switches to a power saving mode when no power is drawn for one minute. Fan - If the temperature is too high, the built-in temperature-controlled fan automatically switches to cooling. Aluminum housing - Suitable for floor & wall mounting. Note: For installation of the inverters on this page, we recommend a 12V fuse. 300W=50A / 700W+1000W=100A / 1500W=150A / 2000W=200A / 3000W=300A
Sinus Power Inverter with mains priority circuit - 1000 to 2000 watts
82277
Integrated 230 volt mains priority circuit: As soon as 230 volt shore power (e.g. from the campsite) is available, the inverter operation is automatically interrupted. The inverter operation again immediately resumed as soon as no more outside power is available. Integrated 3-stage battery charger for gel and AGM batteries with 10 A or 15 A (model-dependent). Spare / extension cable: ± 25 mm², 2 x 200 cm Art. no. 81940 (With 2 ring eyelets pre-assembled) ± 50 mm², 2 x 200 cm...